Mikrotron EoSens 12CXP+, Справочное руководство

Страница: 36 / 88

Acquisition Control
MIKROTRON GmbH 5 - 4
TriggerSelector
This feature is used to select the type of trigger to be configured.
Tip: If FrameBurstStart is
selected, ExposureMode
will have to be set to Timed.
Otherwise, recording will
not be possible.
TriggerMode
This feature activates or deactivates the trigger type selected by the
feature TriggerSelector.
Access
read / write
Type
enumeration
In
FrameStart
FrameBurstStart
the camera will take one picture per
trigger signal
the camera will take as many frames as
defined in
AcquisitionBurstFrameCount
Out
trigger selector type
Remark
Set AcquisitionBurstFrameCount in order to define the number
of frames to be acquired when FrameBurstStart is active.
Access
read / write
Type
enumeration
In
ON
OFF
enables the selected trigger type; the camera waits for a
trigger signal before acquiring a frame. The trigger sig-
nal can be a signal from the frame grabber, the 12-pin
Hirose connector input, or a software trigger initiated
by a software command. The trigger source has to be
set in the feature TriggerSource. In trigger mode, the
frame rate of the camera depends on the frequency of
the trigger signals
disables the selected trigger type; all trigger signals will
be ignored. The camera is set into the current acquisi-
tion mode
Out
active mode
Remark
If a trigger is active, ExposureMode defines whether the expo-
sure of an image is defined by the feature ExposureTime (fixed
exposure time) or by the duration of the trigger signal itself
(variable exposure time). The settings in ExposureMode will only
become effective if triggered mode is ON.