Mikroe EasyPIC V8, Руководство пользователя

Страница: 21 / 36

E a s y P I C v 8 f o r P I C 2 4 / d s P I C 3 3 M a n u a l
P A G E 21
Figure 8: I/O PORTs view
C O N N E C T I V I T Y
1
2
6
5
3
4 7
2x5 pin headers
Besides LEDs, there are also 2x5 pin headers (7) in the PORT sections. All the pins
which belong to a specific PORT are routed to the 2x5 pin header located in that PORT
section, along with the GND and the power rails. The pins on these headers are labeled
according to the names of the MCU pins to which they are routed.
These 2x5 pin headers can be used to expand the connectivity of the EasyPIC v8
for PIC24/dsPIC33 development board, allowing interfacing with other devices,
peripherals, and measurement equipment, either by using IDC10 extension cables,
IDC10 female sockets, or simply by using jumper wires. Enhanced connectivity is
one of the key features of the EasyPIC v8 for PIC24/dsPIC33 development board,
therefore, there are many connectivity options provided. However, 2x5 pin headers
offer the most extensive connectivity option as they expose all the available MCU pins
to the outside world.
SW6.5 - SW6.7 (PORT LEDS):
UP position: Enables LEDs for a specific PORT, associated with the particular DIP
switch position
DOWN position: Disables LEDs for a specific PORT, associated with the particular DIP
switch position