Navn CoWelder™
Produkt UR10E-PI350
Version
A – 1.5.2021
Udfærdiget af:
CTM
7
2.3 Intended Use
The machine, consisting of a Universal Robots robot arm, a Migatronic power source and a welding
torch, are designed for welding simple workpieces, irrespective of quantity and frequency.
The CoWelder, a collaborative robot interacting with one operator, is designed for manual feeding
only.
Cycle capacity: depends on use
Welding speed: up to 400 mm per second
Workpieces are to be transported to and from the robot by the operator.
Use of this machine for purposes other than intended is NOT permissible.
Other preconditions:
•
Operators have read this user guide prior to operating the machine
•
Compliance with all instructions in the user guide
•
Compliance with all inspection and maintenance requirements
•
Use of original spare parts only
Only specially trained staff must carry out transport, commissioning, disposal, troubleshooting and
repair.
Trained staff can operate the machine.
Maintenance and service on the electric system must only be carried out by specially trained staff or
staff trained in carrying out service on electric equipment, or under the surveillance of specially
authorised persons.
According to regulations, it is the owner's responsibility to supply the machine's welding area with
high-efficient extraction. It is also the owner's responsibility to protect the operator and passers-by
from UV radiation.
IMPORTANT
Use the machine in safe and perfect condition only!
IMPORTANT
We strongly recommend you to back up all programmes of robot and welding
machine.
Migatronic Automation cannot be held responsible for any loss of data that may
occur whatever the cause!
