Navn CoWelder™
Produkt UR10E-PI350
Version
A – 1.5.2021
Udfærdiget af:
CTM
69
7.1.3 Machine Parts
Use a soft cloth moistened with water, isopropyl alcohol, 10% ethanol alcohol or 10% naphtha to
clean machine parts.
7.1.4 Painted Surfaces
Use a cloth moistened with spirit (alcohol) to clean painted surfaces.
7.1.5 Aluminium Surfaces
Use a cloth moistened with spirit (alcohol) to clean aluminium surfaces.
7.1.6 Other Parts and Surfaces
Use a cloth moistened with soapy water to clean other parts and surfaces – wipe off with a dry cloth.
7.2 Maintenance
7.2.1 Repair and Maintenance
Operators are fully responsible for the consequences of use of non-original spare parts. In case of
repair and maintenance:
Switch off the power supply to prevent unintended restart
Replacement parts must be identical with the original parts, as stated in the spare parts list.
Keep all machine parts in a good state of maintenance and check them in accordance with usual
workshop standards.
7.2.2 Tools required to carry out Service
Commonly used manual tools and special tools.
7.2.3 Preventive Maintenance
INFORMATION
Regular maintenance is important and ensures long service life, safety
and operational reliability.
