Warning and Safety Instructions
17
Pre-treating (e.g. with cleaning agents or disinfectants), some
types of soiling and the interaction of certain process chemicals can
cause foaming. Foam can have an adverse effect on the cleaning and
disinfection results obtained.
The process must be set so that no foam escapes the wash
compartment. Escaping foam jeopardizes the safe operation of the
machine.
The process must be checked regularly in order to detect any
foaming.
To prevent material damage to the machine and accessories used
from the effects of process chemicals, soiling and their interaction,
follow the notes in chapter "Chemical Processes and technology".
Even when a chemical additive (e.g. cleaning chemical) is
recommended on technical application grounds, the machine
manufacturer takes no responsibility for the effect of such chemicals
on the material of the items being cleaned.
Note that formulation changes, storage conditions, etc., that are not
disclosed by the chemical manufacturer may adversely affect the
cleaning results obtained.
When using process chemicals, always follow the instructions of
the chemical's manufacturer. The process chemicals must only be
used for the application it is designed for and in the situation
specified to avoid material damage and such dangers as a severe
chemical reaction (e.g. an explosive oxyhydrogen gas reaction).
Always follow the relevant manufacturer's instructions on storage
and disposal of process chemicals.
For critical applications, where very stringent reprocessing
requirements have to be met, it is strongly recommended that all
process-related factors (processing chemicals, water quality, etc.) are
discussed in advance with Miele.
For applications that demand especially stringent cleaning and
rinsing results, the operator must ensure that quality control occurs
on a regular basis to meet the standards involved.
Wash carts, baskets, modules and inserts should only be used for
the purpose for which they are designed for.
Hollow items must be thoroghly cleaned, internally and externally.
Secure small and light items with cover nets or place in a mesh
tray for small items, so that they do not block the spray arms.
Empty all containers and hollow utensils before loading them into
the machine.
