Problem solving guide
133
Insufficient salt / Water softener
Problem
Possible cause and remedy
Refill salt
Salt is running low in the water softener.
Refill the reactivation salt before starting the next
program.
Machine locking soon
Insufficient salt
Salt in the water softener is completely used up and
reactivation is no longer possible. The machine is locked for
further use.
Refill with reactivation salt.
Salt container empty,
Program locked
The water softener cannot reactivate because there is
insufficient salt. The machine is locked for further use.
Refill with reactivation salt.
The lock is lifted a couple of seconds after refilling the salt
reservoir. Reactivation will occur automatically during the
next program sequence.
Salt container lid not closed
correctly
The salt container is not closed properly.
Close the container properly.
Salt residues are preventing it from closing.
Clean any excess salt from funnel, the lid and the seal.
Do
not
use running water as this can cause the salt
reservoir to overflow.
Close the container properly.
