Moisture plus
79
To start residual water evaporation
immediately
Steam can cause scalding.
Do not open the door while the
residual water is being evaporated.
Select the Moisture plus
function.
Evaporate residual moisture?
will appear.
Select
Yes.
Evaporate residual moisture
and a time
then appear in the display.
The Evaporate residual moisture
process will then start. You can follow
the time counting down in the display.
The time shown in the display will
depend on the amount of residual water
left in the steam injection system.
During the evaporation process, the
duration may be adjusted by the system
according to the amount of water
currently present.
At the end of the residual water
evaporation process
Process finished
will
appear.
Touch
.
You can now carry out a cooking
process with the Moisture plus
function.
During the evaporation of residual
water, moisture will condense on the
door and the oven compartment. This
moisture needs to be removed after
the oven has cooled down.
To skip residual moisture evaporation
Skipping the residual moisture
evaporation process can, in certain
cases, cause water to overflow into
the oven compartment.
It is best not to cancel the
evaporation process.
Select the Moisture plus
function.
Evaporate residual moisture?
will appear.
Select
Skip
.
You can now carry out a cooking
process with the Moisture plus
function.
Next time you select the Moisture
plus
function and when you switch
the oven off you will be prompted again
to evaporate the residual moisture.
Содержание HR 1956
Страница 22: ...Overview Range Cooker 22 ...
Страница 145: ......
Страница 146: ......
Страница 148: ...M Nr 10 754 320 00 en GB HR1956 ...