Miele HR 1956, Руководство по эксплуатации

Страница: 77 / 148

Moisture plus

77
Injecting bursts of steam
Steam can cause scalding.
Do not open the door during bursts
of steam. Also, condensation on the
sensors will cause them to have a
slow reaction time.
Automatic burst of steam
Automatic burst of steam
appears in the
display.
Once the heating-up phase has been
completed, the automatic burst of
steam is injected.
The water will vaporise in the oven
whilst steam is being released and
Burst
of steam active will appear in the display.
After the burst of steam Burst of steam
finished
will appear in the display.

Continue cooking until the end of the
cooking duration.
1, 2 or 3 bursts of steam
Manual bursts of steam
If you have selected Manual you can
release the bursts of steam as soon as
Start Manual burst of steam
appears in the
display.
Please wait until the heating-up phase
is completed to allow the steam to be
distributed evenly by the warm air in
the oven.
Tip: Set the minute minder

to remind
you when to do so.

Select Start Manual burst of steam .
The burst of steam is released and
Burst
of steam active appears in the display.

Proceed as described to inject further
bursts of steam.
At the end of each burst of steam Burst
of steam finished
appears in the display.

Continue cooking until the end of the
cooking duration.
Time-controlled steam
The oven will release the steam after
the specified amount of time.