Miele H6860BPXB, Инструкции по эксплуатации и монтажу

Страница: 130 / 156

Cleaning and care
130

Place the container with the
descaling solution on the floor of the
oven.

Attach the plastic tube to the end of
the water intake pipe. Place the other
end in the bottom of the descaling
solution container, and secure the
plastic tube to the container with the
suction cup.

Confirm with OK .
The intake process will begin. You can
hear the pump while this is happening.
The intake process can be interrupted
and restarted at any time by selecting
Stop or Start .
The amount of solution specified can be
more than the amount which is actually
taken in. Some of the solution may
therefore be left in the container at the
end of descaling.
A message will appear in the display
when the intake process is finished.

Confirm with OK .
The activation phase will begin. You
can follow the duration as it counts
down.

Leave the container with the tube
connected to the water intake pipe in
the oven. Top the container up with
approx. 300 ml of water, as the
system will need to draw in some
more liquid during the activation
phase.
The system will take in more liquid at
approximately 5 minute intervals. You
will hear the noise of the pump for a
moment or so.
The oven lighting and the cooling fan
will remain on during descaling.
At the end of the activation phase a
buzzer will sound, if the buzzer is
switched on (see "Settings - Volume -
Buzzer tones").