Miele H6860BPXB, Инструкции по эксплуатации и монтажу

Страница: 116 / 156

Cleaning and care
116
Pyrolytic cleaning

of the
oven interior
Instead of cleaning the oven manually
you can run the Pyrolytic cleaning
programme

.
During pyrolytic cleaning the oven
interior is heated up to over 400 °C. Any
residual soiling is broken down and
reduced to ash by the high
temperatures.
This oven has three levels of pyrolytic
cleaning, each with a different duration.
Select:
– Level 1 for light soiling
– Level 2 for heavier soiling
– Level 3 for very heavy soiling
The oven door locks automatically as
soon as the Pyrolytic cleaning
programme starts. It cannot be opened
until after the programme has finished.
The timer can be used to delay the start
of pyrolytic cleaning, for instance to
make use of cheaper electricity tariffs.
At the end of pyrolytic cleaning any
residues such as ash from the pyrolytic
process can be easily wiped away.
Setting up for pyrolytic cleaning
The high temperatures used during
pyrolytic cleaning will damage
accessories that are not designed for
pyrolytic cleaning.
Please remove these accessories
from the oven interior before starting
pyrolytic cleaning. This also applies
to non-pyrolytic accessories
purchased separately to the oven.
The following accessories are suitable
for pyrolytic cleaning and can be left in
the oven:
– Side runners
– FlexiClip telescopic runners HFC 72
– Rack HBBR 72

Take all non-pyrolytic accessories out
of the oven.
 Place the rack on the top shelf level.
Coarse soiling in the oven
compartment can cause an
accumulation of smoke which can
lead to the pyrolytic cleaning
programme switching off.
Burnt on residues can leave
discolouration or matt areas on
enamelled surfaces.
 Before running the pyrolytic cleaning
programme, remove coarse soiling
from the oven compartment and
loosen any burnt on residues with a
scraper suitable for use on glass.