Cleaning and care
106
Starting pyrolytic cleaning at a later
time
To start the pyrolytic cleaning
programme later, select
Start at
.
Confirm with
OK
.
Set the time at which pyrolytic
cleaning should start.
Confirm with
OK
.
The door will lock automatically.
Start at
and the start time set will appear in the
display.
You can reset the start time via
Timer
at
any point up to the starting time.
As soon as the start time has been
reached, the oven heating and cooling
fan will switch on automatically and the
time remaining will appear in the
display.
Finalising pyrolytic cleaning
When the time remaining has fully
elapsed, a message will appear in the
display to tell you that the door is
unlocking.
Finished
will appear in the display and a
buzzer will sound as soon as the door
has been unlocked.
Confirm the message shown with
OK
.
Select
Close
.
Switch the oven off.
The visual and acoustic signals will
switch off.
Risk of injury caused by hot
surfaces.
At the end of the pyrolytic cleaning
programme, the oven will still be very
hot. You could burn yourself on the
heating elements, oven compartment
or accessories.
Allow the heating elements, oven
compartment and accessories to
drop to a safe temperature before
removing any pyrolytic residues and
lubricating the side runners.
Clean the oven compartment and
pyrolytic accessories to remove any
pyrolytic residues (e.g. ash) that may
have built up depending on the
degree of soiling in the oven.
Add a few drops of heat resistant
cooking oil to some kitchen paper
and use this to lubricate the side
runners.
