Notes for test institutes
144
Energy efficiency rating
The energy efficiency rating is determined in accordance with EN 60350-1.
Energy efficiency rating: A+
Please observe the following when conducting testing:
– Testing is undertaken using the
Eco Fan heat
function.
– Select the
Lighting
|
"On" for 15 seconds
setting (see “Settings” – “Lighting”).
– Select the
Proximity sensor
|
Switch the light on
|
Off
setting (see “Settings”, –
“Proximity sensor (movement sensor)”).
– Only accessories that are required for testing should be in the oven
compartment during tests.
Do not use other accessories that might be available such as FlexiClip runners
or catalytic enamelled panels such as side panels or roof liners.
– An important pre-condition for determining the energy efficiency rating is that
the door is tightly shut during testing.
Depending on measurement devices used, the functioning of the door seal can
be affected to a greater or lesser extent. This has a negative impact on the test
results.
Pushing against the door will compensate for this. In certain unfavourable
circumstances, suitable technical aids may also be necessary for this. This does
not occur in normal use.
Data sheet for household ovens
In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No.
66/2014
MIELE
Model name/identifier
H 7660 BP
Energy efficiency index/cavity (EEI
cavity
)
81,7
Energy efficiency class/cavity
A+++ (most efficient) to D (least efficient)
A+
Energy consumption per cycle for each cavity in conventional mode
1,10 kWh
Energy consumption per cycle for each cavity in fan-forced convection
mode
0,71 kWh
Number of cavities
1
Heat source(s) per cavity
electric
Volume of cavity
76 l
Mass of the appliance
47,0 kg
