![Midian Electronics TRC-1000 Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/midian-electronics/trc-1000/trc-1000_manual_1791953009.webp)
9
CONTROLS & INDICATORS
Power/Volume Switch:
On the right side of the TRC, there is a switch which acts as the power and volume
switch. The switch is in the power off position when turned fully clockwise past the click. Turning the switch
counter-clockwise past the click turns the power on to the volume control. At this point the volume is in the low
position. Turning the switch further counter-clockwise increases the volume.
LCD:
The 2-line LCD displays the time on the first line and the frequency selection and frequency alias on the
second. When a dialing sequence is performed the second line is cleared and the dialing sequence is displayed.
Channel changes are also shows between parallel remotes.
LED 1 (PWR - LINE/SUP):
This LED is a bi-color LED. The LED will glow red when the power is on to the TRC. It
glows orange when Line 2/Supervisor mode is active.
LED 2 (SEND - F1/F2):
This LED is a tri-color LED. The LED will glow red during transmit of Freq 1 and orange
during transmit of Freq 2. It glows green when Guard Tone is detected from a parallel tone remote.
FREQ:
The FREQ button acts as the frequency select and the function select key. Pressing this key followed by
0-17 will select the associated frequency or function. When using the TRC with Midian’s TTC-1 tone remote
adaptor both frequency and function tones are available. When using the TRC with another manufacturer’s tone
remote adaptor the frequency tones are selectable.
INTER:
Pressing the INTER key will allow intercom communications between several connected tone remotes
without transmitting over the radio. When the INTER key is pressed and held, the audio is routed on the line
without the Guard Tone activating the transmitter. Other tone remotes on the same line will hear the audio
automatically. No cross mute is available in intercom mode since there is no Guard Tone present.
MONITOR:
Pressing the MONITOR key will allow the user to monitor the channel before pressing the SEND key
to make a call. If a conversation is heard then another co-channel user presently “owns” the channel and should
not be interrupted.
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
PQRS
7
TUV
8
WXYZ
9
MENU
*
OPER
0
CLR
#
FREQ
INTER
MONITOR
SEND
◄
SCROLL
►
PWR - LINE/SUP SEND - F1/F2
12:00
Freq: 01 Fire 1