12
Receiving:
When a field radio keys up, the tone remote adaptor passes the voice down the line to the TRC. The
voice will then be passed through to the internal speaker of the TRC.
Intercom:
Pressing the INTER key activates the Intercom function. Press and hold the INTER key to call other
remotes on the line without keying the base station. No tones are sent when the intercom is activated. Therefore,
the cross mute feature does not work in intercom mode.
Line 2/Supervisor Capability (* + #):
If the TRC is ordered with TRC Option E, then the TRC is equipped with
the Line 2/Supervisor Capability. Line 2 is used for toggling between 2 different base station radios and
Supervisor is used to shut down any paralleled remotes. Pressing the * and # keys simultaneously activates the
Supervisor or the Line 2 mode depending on the options installed in the unit. Pressing the keys again deactivates
the Supervisor or the Line 2 mode. When activated LED 1 changes from red to orange.
Memory Dialing:
The TRC supports up to 9 memory dials (1-9). Press and release the * key, followed by the
desired 1-9 number key for 1 second.
Last Number Redial:
The TRC can recall the last sequence dialed by pressing and releasing the * key followed
by the SEND key.
Call Mode:
To enter call mode press the MENU key and CALL will be displayed on the LCD. Press the SEND key to select
the CALL function. In the Control Mode simply pressing the 0 key is a shortcut to the Call Mode.
Direct Dialing:
Once in the call mode as above, simply press the numeric keys of the desired dialing sequence
and press SEND. Note the TRC employs an Automatic Pager Profile Selection. This means that of the ten pager
profiles there can be 10 different types of pages based on the number of digits entered and the profile
corresponding to the number of digits (i.e 4 digits equals pager profile 4, 7 digits equals pager profile 7, etc.). If for
example you wish to be able to enter any number of DTMF digits, then each pager profile should be set for
DTMF. The default settings for each pager profile are shown in the Programming Section.
Database Dialing:
Once in the call mode as above, simply press the INTER key to scroll right through the
database until the desired ID is found. Once found, press the SEND key. If while scrolling the desired ID is
passed by, press the FREQ key to scroll left. Depending on the Data Entry Mode setting you can scroll by cap
code (numeric) or Alias (alphanumeric).
Speed Dialing:
Speed dialing can be done in the Control Mode. The speed dials (or memory dials) are set up in
the Menu Mode of this manual. The TRC can have 9 speed dial memory locations set up in memory, which are
associated with the 1-9 keys. Press and release the * key and the press and hold the desired 1-9 key for 1 second
and the unit will automatically dial the associated speed dial.
Menu Mode:
For details on the Menu Mode please reference the Product Programming section.
