16
The following sections describe the various functions of the menu system. Shortcut keys are shown for those
menu items that have shortcuts. Factory default settings are shown underlined.
CALL <0>
When the call command is selected you will be prompted to enter a user ID. You can either enter a unit ID or
scroll right to enter into the database. The database will show the user ID, if you wish to display the user name
press the MENU key to switch between the user ID and the user name. Once the desired user is found press
SEND to call the unit.
LOCK/UNLOCK
Note: The Lock and Unlock menu options do not appear unless enabled in security setup. If enabled the
password protects all options in the menu map after the call option. Enter the 4-digit password that was set up in
the security setup to unlock the menu.
USERS menu <1>
Add User menu:
Allows you to add a new user to the database. When ADD USER is selected, you will be
prompted to fill in the information for that user such as User ID and User Name.
Delete User menu:
Allows you to delete a user record from the database. When DELETE USER is selected,
you will be able to select the user you wish to delete in the same manner as if placing a CALL. Use the scroll
keys to find the user you wish to delete. Press SEND to delete the selected user. You will have to press
SEND a second time to confirm. Press CLR to cancel.
EDIT USER menu:
Allows you to change information about a user. Select the user you wish to edit in the
same manner is if placing a CALL to that user. Use the scroll buttons to find the user you wish to edit. Press
SEND to edit the information for the selected user. You will be prompted to fill out each field in turn. After
entering the data for a field, press SEND to go on to the next field. To leave a field unchanged, simply press
SEND without entering data.
User Name:
This alphanumeric field contains the name of the user associated with the user ID. A maximum
of 14 characters may be used.
Range: 0-14
characters
Default: blank
Pager Profile:
Select the desired pager profile for this user.
Cap Code:
This numeric field contains the ID assigned to the user’s radio. This will be the number used when
calling a unit. The length of the pager code depends on the Pager Profile This is a required field. Note: If using
the Any 2 Tone feature the cap code is 10 digits in length (A tone equals 5 digits and B tone equals 5 digits
(i.e. 349.0 Hz = 03490)).
Range: 0-14
digits
Default: blank
