29
SPEED DIAL EMPTY
Reason:
You have pressed a speed dial number, but there is no user associated with it. The user may have been
deleted, or no association was ever made.
Solution:
Go to speed dial setup and associate a user in the database to the speed dial number.
INVALID CAP CODE
Reason:
The number of digits in the CAP code are incorrect for the pager format being used.
Solution:
Enter the correct number of digits. Most built-in 2-tone formats require exactly 3 digits and ‘any 2-tone’
requires 10 digits (A tone equals 5 digits and B tone equals 5 digits (i.e. 349.0 Hz = 03490)). The other formats
can accept 1-10 digits.
PROFILE IN USE
Reason:
You have selected a pager profile to edit that is associated with a user in the database. This message is
provided as a warning so that you do not change a user’s profile unintentionally.
Solution:
You may either press <#> to cancel your selection, or press <SEND> to proceed to view or edit the
selected profile. Changing an already assigned profile may cause problems if the profile changes, say, from
POCSAG to 2-Tone because 2-Tone users cannot have 7-digit CAP codes! Please keep this in mind if you
proceed to do this.
