Midian Electronics TRC-1000, Руководство пользователя

Страница: 23 / 39

23
When to Send setting: Select when the frequency/function tone is sent. The options are as follows:
AFTER SEND: The tone will be sent after high level guard tone every time the SEND key is pressed
and ONLY after the SEND key is pressed. Therefore this setting is applicable only when the tone is
used only for TX frequency control.
AFTER FREQ: The selected tone will be sent (preceded by high level guard tone) immediately after
being selected by pressing FREQ followed by the tone number. The tone to be sent after pressing
SEND will not be changed. This is the setting to select when the tone is used for function control only.
It will be classified as a function when function display is turned on. This could also be used for RX
frequency control (if different from TX).
BOTH: The selected tone will be sent (preceded by high level guard tone) immediately after being
selected by pressing FREQ followed by the tone number. This tone will also be sent the next time
SEND is pressed. This is the setting to select when the tone is used for both RX and TX frequency
control (most common). A tone with this setting will be treated as a frequency as opposed to a
function.
Label setting: Allows you to label the frequency/function tone to clarify how it is being used. The
programmed label will appear when in Control Mode.
Range: 0-8 characters
Default: see below
Freq/Func Defaults: The following are the default attributes for the frequency/function tones when
shipped from the factory:
Tone Frequency When to Send Label
F1 1950 BOTH CHAN 1
F2 1850 BOTH CHAN 2
F3 1750 BOTH CHAN 3
F4 1650 BOTH CHAN 4
F5 1550 AFTER FREQ FUNC 5
F6 1450 AFTER FREQ FUNC 6
F7 1350 AFTER FREQ FUNC 7
F8 1250 AFTER FREQ FUNC 8
F9 1150 AFTER FREQ FUNC 9
F10 1050 AFTER FREQ FUNC 10
F11 950 AFTER FREQ FUNC 11
F12 850 AFTER FREQ FUNC 12
F13 750 AFTER FREQ FUNC 13
F14 650 AFTER FREQ FUNC 14
F15 550 AFTER FREQ FUNC 15
F16 2350 AFTER FREQ FUNC 16
F17 2450 AFTER FREQ FUNC 17
F18 2550 AFTER FREQ FUNC 18
F19 2650 AFTER FREQ FUNC 19
Note: F16 through F19 do not have standardized tone definitions.