Midea MV6-i252WV2GN1-E, Руководство по обслуживанию

Страница: 48 / 130

V6-i VRF 50/60Hz
47
P
art
3
- Con
tr
ol
7.2 Defrosting Operation
In order to recover heating capacity, the defrosting operation is conducted when the outdoor unit heat exchanger is
performing as an evaporator. The defrosting operation is controlled according to outdoor ambient temperature, outdoor
heat exchanger temperature, indoor heat exchanger temperature and outdoor unit running time. When the outdoor unit is
running in defrosting, the digital display on outdoor main PCB will display “df”.
Table 3-7.5: Outdoor unit component control during defrosting operation
Component
Wiring
diagram label
8-12HP 14-18HP 20-24HP 26-28HP 30-32HP Control functions and states
Inverter compressor A COMP(A)
● ● ● ● ●
Fixed frequency
Inverter compressor B COMP(B)
● ● ●
DC fan motor A FANA
● ● ● ● ●
Off
DC fan motor B FANB
● ● ●
Electronic expansion valve A EXVA
● ● ● ● ●
Position 480 (steps) or 3000
(steps)
Electronic expansion valve C EXVC
● ● ● ● ●
Position 480 (steps)
Four-way valve ST1
● ● ● ● ●
Off
Solenoid valve (oil balance) SV4
● ● ● ● ●
Normal control
Solenoid valve (fast defrosting) SV5
● ● ● ● ●
On
Solenoid valve (EXV bypass) SV6
● ● ● ● ●
On
Solenoid valve (indoor units
bypass)
SV7
● ●
Normal control
Solenoid valve (inverter
compressor A vapor injection)
SV8A
● ● ● ●
Off
Solenoid valve (inverter
compressor B vapor injection)
SV8B
● ●
Off
Solenoid valve (inverter
compressor B pressure balance)
SV9
● ● ●
Open before compressor B
startup
Table 3-7.6: Indoor unit component control during defrosting operation
Component Unit state Control functions and states
Fan
Thermo on Off
Standby Off
Thermo off Off
Electronic expansion valve
Thermo on 480 (steps)
Standby 480 (steps)
Thermo off 480 (steps)