Service manual for Wash and Dry Combo product
Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
－
29
－
No water inlet or water inlet overtime (E10)
No water inlet or water inlet
overtime (E10)
Whether the Drain Hose is
hung up beyond the height of
100cm
The drain hose end should be over 100cm height from
the bottom of the unit.
Check the faucet for fully open.
Check the water pressure.
The water pressure should be in range from 0.05MPa to
1MPa.
Check the drainage hose.
If the unit is draining water at the same time, check the
pump for failure.
Whether the inlet filter net is
blocked
Clean the water filter if blocked.
Check the wire connection.
Check the wires for open
cycled.
If the wires are open cycled, replace the harness.
Check the inlet valve. Replace
if failure.
Replace the PCBs
The resistance on coil should be between
4-
5KΩ.
