Service manual for Wash and Dry Combo product
Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
－
19
－
small sock or other article of
clothing to get caught in the drain
pump or in the drain hose. Check
both for an obstruction before
replacing the pump.
PCB
Check PCB
E30
Door can’t be
locked with
over 3 times’
fail
Unit will stop
with Error
code display
Door Lock
If the door won‘t latch, the door
lock assembly might be defective.
If the door won’t latch ,check the
door to see if the door is closed
before replace it.
PCB
If the washer door won‘t unlock
the problem might be the main
control board. This is not
common. Check the inner wire
between the PCB and the door
lock.
.
E31
Door can’t be
unlocked with
over 3 time’s
fail.
Unit will stop
with Error
code display
Door Lock
If the door won‘ unlock, the door
lock assembly might be defective.
If the door won’t latch ,check the
door to see if the door is closed
before replace it.
PCB
If the washer door won't unlock
the problem might be the main
control board. This is not
common. Check the inner wire
between the PCB and the door
lock.
E33
The main PCB
can’t get
Water Switch
signal.
Unit will close
valve and
motor, pump
started then
door unlocked
with Error
code display
Water level
sensor or
control switch
(No voltage on
the water inlet
valve)
E33 means the unit can’t detect
the
Signal of Water level sensor.
CHECK THE WATER LEVERL
SENSOR
CHECK THE PCB and the inner
wire between PCB and the sensor
E34
Temp sensor
on water
heater open
cycle
Unit will work
normally
The temp
sensor failed.
The temp sensor failed.
E35
Temp sensor
on water
heater short
cycle
Unit will work
normally
The temp
sensor failed.
The temp sensor failed.
