Service manual for Wash and Dry Combo product
Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
－
25
－
The washing machine does
not fill
Open the water tap.
Check the selection of the procedure.
Check the water.
Pressure to see if the water pressure is insufficient.
Put through the feed-water.
Close the washing machine's door.
To check it the inlet water pipe is bent or blocked.
The washing machine fills
and empties at the same
time.
Make sure the end of the drainage pipe to be higher.
Check if the drainage pipe and sewage have been sealed, if they
have been, there will be the poor ventilation to cause the sip hon
age effect.
No drainage of the washing
machine
Check if the drainage pump is blocked.
Check if the drainage pipe is bent or blocked.
Check the height of the drainage nozzle, make sure it is0.6-1
meter from the bottom of the washing machine.
Vibration of the washing
machine
Level the washing machine.
Fasten the footing.
To check if the internal packing for the transportation have all
been removed.
