Service manual for Wash and Dry Combo product
Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
－
10
－
2.4 Cleaning and Maintenance
Cabinet:
The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If
there is any water overflow, use the wet cloth to wipe it off immediately. No sharp items are
allowed to strike the cabinet.
Internal Drum:
The rusts left inside the drum by the metal articles shall be removed immediately with
chlorine-free detergents. Never use steel wool.
Dispose a Frozen Washing Machine:
When the temperature drops below zero and your washing machine gets frozen, you may:
1. Disconnect the power supply for the washing machine;
2. Wash the tap with warm water to loosen inlet pipe;
3. Take down inlet pipe and immerse it in warm water;
4. Pour warm water into washing drum and wait for 10 minutes;
5. Reconnect inlet pipe to the tap and check whether inlet and outlet are working normally.
Anti-freeze:
If your washing machine is located in the room where it can get frozen easily, please drain the
remaining water inside drain pipe and inlet pipe thoroughly. Remove the remaining water in inlet
pipe and drain pump.
Detergent box and grooves:
1. Press down the arrow location on softener cover inside the drawer.
2. Lift the clip up and take out softener cover and wash all grooves with water.
3. Restore the softener cover and push the drawer into position.
Water inlet valve filter
1. Screw off the inlet pipe from the backside of the machine.
2. Pull out the filter with pliers, clean it with water and reinstall
it back after being washed.
3. Reconnect the inlet pipe.
4. Open the tap and make sure there is no water leakage.
5. Close the tap.
