Microwave Radio Communications SCM4000, Техническое справочное руководство

Страница: 154 / 274

Routine Operation 3-132 SCM4000 Operator’s Guide/Tech Ref Manual
12. Press the Up arrow key to move the >> cursor to the
MPEG Encoder option.
13. Press the SEL key or Right arrow key and observe the
MPEG Encoder menu is displayed. See Figure 3-
375 .
Figure 3-375: MPEG Encoder Menu
14. Press the Up or Down arrow keys, as required, to
select the
Audio B Input: option.
15. Press the SEL key or Right arrow key and observe the
> cursor changes to a ! cursor.
Note If the SDI option is selected in the following step
and SDI 525 (NTSC operation) or SDI 625 (PAL
operation) was not selected when performing
“Monitor/Change Video Setting” on page 3-127 ,
SDI will change to Analog approximately 5
seconds after pressing the SEL key.
16. Press the Up, Down, Left, or Right arrow keys, as
required, to change the
Input: setting to AES/EBU ,
TstTon , Analog , or SDI .
17. Press the SEL key and observe the ! cursor changes
to a > cursor.
18. Press the Down arrow key to select the Audio B
Mode: option. See Figure 3-376 .
SCM4000
>> MPEG Encoder
Modulator
System Menu
Figure 3-376: Audio B Options
19. Press the SEL key and observe the ! cursor changes
to a > cursor.
20. Press the Up or Down arrow keys, as required, to
select the
Audio B Mode: option.
21. Press the Up, Down, Left, or Right arrow keys, as
required, to change the
Mode: setting to Mono or
Stereo .
22. Press the SEL key and observe the ! cursor changes
to a > cursor.
23. Press the Up or Down arrow keys, as required, to
select the
Audio B Type: option. See Figure 3-377 .
Figure 3-377: Audio B Options
24. Press the Up, Down, Left, or Right arrow keys, as
required, to change the
Type: setting to MPEG or Off .
25. Press the SEL key and observe the ! cursor changes
to a > cursor.
26. Press the ESC key repeatedly until the Main Screen is
displayed.
MPEG Encoder
Audio B
> Input: AES/EBU
Mode: Mono
MPEG Encoder
Input: AES/EBU
Mode: Mono
> Type: MPEG