Microwave Radio Communications SCM4000, Техническое справочное руководство

Страница: 148 / 274

Routine Operation 3-126 SCM4000 Operator’s Guide/Tech Ref Manual
Figure 3-356: Preset Menu
8. Press the Up or Down arrow keys, as required, to
move the cursor to the
Recall Preset option. Observe
the cursor changes to a > cursor.
9. Press the SEL key or Right arrow key and observe the
Recall Preset option changes to #X:Preset #X , as
shown in Figure 3-357 , and the > cursor changes to a
! cursor.
Figure 3-357: Recall Preset Option
10. Press the Up, Down, Left, or Right arrow keys to select
Preset
1 thru 9 , as required, and press the SEL key.
11. Press the ESC key repeatedly until the Main Screen is
displayed.
12. Press the Up arrow key to move the >> cursor to the
MPEG Encoder option.
13. Press the SEL key or Right arrow key and observe the
MPEG Encoder menu is displayed. See Figure 3-
358 .
Preset Menu
* #X: Preset #X
Save Settings
Recall Preset
Preset Menu
! #X: Preset #X
Save Settings
Figure 3-358: MPEG Encoder Menu
14. Press the Up or Down arrow keys, as required, to
select the
Rate: option.
15. Press the SEL key or Right arrow key and observe the
> cursor changes to a ! cursor.
16. Press the Up, Down, Left, or Right arrow keys, as
required, to change the
Rate: setting to the value
required. The Rate: setting value range is from 0.0 to
50.0 Mb/s.
17. Press the SEL key and observe the ! cursor changes
to a > cursor.
18. Press the ESC key repeatedly until the Main Screen is
displayed.
Note Changes to Presets are not automatically saved.
Changes to Preset settings will be lost if the Preset
is recalled before Preset setting changes have
been saved.
To save Preset setting changes, go to step 19. To
recall bit rate Preset settings established prior to
performing this procedure without saving the latest
changes, go to step 20.
19. To save Preset setting changes, perform “Save Preset
Settings” on page 3-154 . Procedure is complete.
MPEG Encoder
Delay: Standard
> Rate: 10.0Mb/s
Video: SDI 525