MICROTRONIX DX-2200 страница 98 Скачать руководство пользователя | Manualshive

Страница: 98 / 103

background image

DX-2200

– SD/HD-SDI Text & Graphics Inserter – User Manual

Page 98 of 103

Appendix C: Regulatory Compliance Information

Equipment Type: Information Technology Equipment

Product: DX-2200-TI, Text Inserter

Model No: DX-2200-xx-xx where xx are any combination of the alphanumeric characters.

NOTE: The DX-2200-TI, HD-SDI Text Inserter product is a sub-set of the DX-2200, 2x1 Dual-view SDI

Video  Switcher  product,  a  unit  which  uses  the  exact  same  board  but  has  the  components  for  two
SDI  video  inputs  installed.    The  unit  was  tested  for  compliance  in  a  DX-2200,  2x1  Dual-view  SDI
Video Switcher configuration.

C.1 Industry Canada (IC)

The DX-2200, 2x1 SDI Video Switcher product has been tested and found to comply Industry Canada ICES-
003, Issue 5, Class A

– Information Technology Equipment (ITE), the compliance as suggested by Industry

Canada is as follows:

CAN ICES-3 (A)/NMB-3(A)

C.2 Federal Communications Commission (FCC) Declaration of Conformity

Responsible Party:

Microtronix Datacom Ltd.

4056 Meadowbrook Drive, Unit 126, London, ON Canada

TEL: +(1) 519-690-0091

The Responsible Party declares the DX-2200, 2x1 SDI Video Switcher product has been tested and found to
comply FCC PART 15, SUBPART B, Class A

– Unintentional Radiators.

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to
Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instruction
manual,  may  cause  harmful  interference  to  radio  communications.  However,  there  is  no  guarantee  that
interference  will  not  occur  in  a  particular  installation.  If  this  equipment  does  cause  interference  to  radio  or
television  reception,  which  can  be  determined  by  turning  the  equipment  OFF  and  ON,  the  user  is
encouraged to try to correct the interference by one or more of the following measures:

•

Ensure that all mounting screws, attachment connector screws, and ground wires are tightly
secured.

•

Reorient the receiving antenna.

•

Increase the separation between the equipment and the receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

•

Call the dealer or an experienced radio/TV technician for help.

«
...
96
97
98
99
100
...
»

Содержание DX-2200








































































































Отзывы:

Нет отзывов

Похожие инструкции для DX-2200

Бренд: Dataprobe Страницы: 31

Бренд: IBM Страницы: 13

Flex System EN2092

Бренд: IBM Страницы: 2

Бренд: Eaton Страницы: 8

Бренд: Kramer Страницы: 8

Бренд: Cabletron Systems Страницы: 14

Бренд: Bühler technologies Страницы: 20

Бренд: Sunix Страницы: 55

Бренд: Lockly Страницы: 12

Бренд: Manhattan Страницы: 4

Бренд: Sven Страницы: 4

Бренд: Lindy Страницы: 12

S-Mix-Pro 18*18

Бренд: Kensence Страницы: 24

Бренд: KDS Страницы: 10

Бренд: ALFAtron Страницы: 45

Master View CS-102

Бренд: ATEN Страницы: 11

Бренд: Jasco Страницы: 2

Бренд: SolidView Страницы: 39

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды