MICROTRONIX DX-2200, Руководство пользователя

Страница: 80 / 103

DX-2200
– SD/HD-SDI Text & Graphics Inserter – User Manual
Page 80 of 103
x x OFF ON
Sets the mode of the DX-2200-TI to Text Inserter with PiP (equivalent to the
M2 Serial Command).
If there is a compatible signal on the second input, it will be displayed as the
PiP.
x x ON OFF
Sets the mode of the DX-2200-TI to Text Inserter with scaling (equivalent to
the M3 Serial Command). In this mode the main input can be scaled up. PiP
is not displayed and the second input is not used.
x x ON ON This switch combination does not apply any mode setting to the DX-2200-TI
OFF OFF x x
Set PiP mode position to the upper right corner
Set Scaler mode zoom 100%
(equivalent Serial Commands P1;ZS100)
OFF ON x x
Set PiP mode position to lower right corner,
Set Scaler mode zoom to 125%
(equivalent Serial Commands P2;ZS125)
ON OFF x x
Set PiP mode position to upper left corner
Set Scaler mode zoom to 150%
(equivalent Serial Commands P3;ZS150)
ON ON x x
Set PiP mode position to lower left corner
Set Scaler mode zoom to 200%
(equivalent Serial Commands P4;ZS200)
By default, the settings of the DIP switch are read when the switch is changed and also at startup if
there is no saved configuration. When there is a saved configuration the switch is not read at startup
to avoid overriding the saved settings. Refer to the user interface commands for other DIP switch
options.