MICROTRONIX DX-2200, Руководство пользователя

Страница: 49 / 103

DX-2200
– SD/HD-SDI Text & Graphics Inserter – User Manual
Page 49 of 103
Command
Code
Mode of Operation
SnnBbbb
For Graphic Field nn on Layer 1, set the value of the blue component of the line color
to bbb, where bbb is a number between 1 and 3 digits in length and in the range 0 to
255.
The line color is used for text characters, the line region of rectangles, and for corner
markers and the target marker.
SnnArrr
For Graphic Field nn on Layer 1, set the value of the transparency for the line or
image to aaa, where aaa is a number between 1 and 3 digits in length and in the
range 0 to 255.
aaa = 0 makes the background fully visible.
aaa = 255 makes the background fully transparent (invisible).
The line color is used for text characters, the line region of rectangles, and for corner
markers and the target marker.
SnnFXwwww
For Graphic Field nn on Layer 1, set the fill width (in pixels) associated with the top
and bottom (horizontal) lines of a rectangle.
wwww is a number between 1 and 4 digits in length. A width of zero means there is
no fill associated with the top and bottom lines.
SnnFYwwww
For Graphic Field nn on Layer 1, set the fill width (in pixels) associated with the left
and right (vertical) lines of a rectangle.
wwww is a number between 1 and 4 digits in length. A width of zero means there is
no fill associated with the left and right lines.
SnnFLwwww
For Graphic Field nn on Layer 1, set the fill width (in pixels) associated with the left
line of a rectangle.
wwww is a number between 1 and 4 digits in length. A width of zero means there is
no fill associated with the left line.
SnnFRwwww
For Graphic Field nn on Layer 1, set the fill width (in pixels) associated with the right
line of a rectangle.
wwww is a number between 1 and 4 digits in length. A width of zero means there is
no fill associated with the right line.
SnnFTwwww
For Graphic Field nn on Layer 1, set the fill width (in pixels) associated with the top
line of a rectangle.
wwww is a number between 1 and 4 digits in length. A width of zero means there is
no fill associated with the top line.
SnnFBwwww
For Graphic Field nn on Layer 1, set the fill width (in pixels) associated with the
bottom line of a rectangle.
wwww is a number between 1 and 4 digits in length. A width of zero means there is
no fill associated with the bottom line.
SnnWxxxx,yyyy
For Layer 1, set the Width parameter of Graphic Field nn to the value xxxx for the x
direction and to the value yyyy for the y-direction.
xxxx and yyyy are numbers between 1 and 4 digits in length.
For Rectangles, Width is the number of pixels drawn in the line color at the perimeter
of the rectangle. Any remaining pixels inside the rectangle are the fill region and are
drawn with the fill color (if drawing of the fill is enabled). If width is zero, the entire
rectangle is drawn in the line color.
For Corner markers, Width is the width in pixels of the lines that make up the corner
markers.
For the Target Marker, Width is the width in pixels of the vertical and horizontal lines
that form the Target Marker. Width has a resolution of two pixels so that the target
marker is always symmetrical with ½ the width drawn on each side of the center.