MICROTRONIX DX-2200 Скачать руководство пользователя | Manualshive

Страница: 60 / 103

background image

DX-2200

– SD/HD-SDI Text & Graphics Inserter – User Manual

Page 60 of 103

Command

Code

Mode of Operation

LnnnW

Swap the active and spare buffers on layer n, then clear the new spare buffer. No fields
are rendered and the spare buffer is displayed with its existing content.
nnn is the layer number(s), See **

LnnnS

Swap the active and spare buffers on Layer n without rendering and fields or clearing of
any buffers.
nnn is the layer number(s), See **

LnnnC

Clear the spare buffer on Layer n.
n is a number in the range 0 to 3, See **

LnnnD

Disable display of Layer n. The entire layer is disabled without changing the settings of
any Text or Graphic Fields on that layer. Use LnE to make the layer visible again.
nnn is the layer number(s), See **

LnnnE

Enable display of Layer n. If the layer was previously disabled with LnD, then this
command makes the layer visible again.
The LnD and LnE commands provide a very fast method of turning an entire layer on
and off.
nnn is the layer number(s), See **

LnnnH

Disable layers that are not needed. Note: This command may disturb the output video.

LnnnA

Enable a layer that has been previously disabled with LnnnH. Note: This command may
disturb the output video.

LnnnT

Toggle the visibility of Layer n between on and off.
nnn is the layer number(s), See **

LnnnZ

Set the size and visibility of Layer n to default. The defaults are visible and the same
size as the output video of the DX-2200-TI-03.
nnn is the layer number(s), See **

LnnnKxxxx,yyyy

Set a preferred size for an overlay layer. xxxx and yyyy are numbers between 1 and 4
digits in length. The size of an overlay cannot be less than 16 pixels in either direction.
Setting xxxx=0 and/or yyyy=0 uses the default size, which is the same size as the output
video.
nnn is the layer number(s), See **

LnnnPxxxx,yyyy

Set the x and y position of the overlay for Layer n.
xxxx and yyyy are numbers between 1 and 4 digits in length.
The overlay must always fit completely within the output video and the position specified
in this command is automatically adjusted to prevent the overlay extending beyond the
edges of the video.
Therefore, if the overlay is at the default size (the same size as the output video) it can
only be positioned in one location and this command will have no effect. The overlay can
only change positions if the size has been reduced to be smaller than the output video
size.
nnn is the layer number(s), See **

LnnnPXxxxx

Set the x-direction position only for overlay Layer n.
nnn is the layer number(s), See **

LnnnPYyyyy

Set the y-direction position only for overlay Layer n.
nnn is the layer number(s), See **

LnnnPM1

Set the position coordinates for layer n to be specified as top-left corner of the overlay
nnn is the layer number(s), See **

«
...
58
59
60
61
62
...
»

Содержание DX-2200








































































































Отзывы:

Нет отзывов

Похожие инструкции для DX-2200

Бренд: S&C Страницы: 26

Бренд: S&C Страницы: 37

Бренд: S&C Страницы: 28

DGS-3224TGR - Switch

Бренд: D-Link Страницы: 160

Бренд: D-Link Страницы: 145

DGS-1510 Series

Бренд: D-Link Страницы: 64

DES-3528 - xStack Switch - Stackable

Бренд: D-Link Страницы: 367

xStack DGS-3427

Бренд: D-Link Страницы: 246

Бренд: Campbell Страницы: 10

Бренд: Videosec Страницы: 5

MaxiiNet VI3026

Бренд: Vigitron Страницы: 288

Бренд: nedis Страницы: 24

Бренд: DataParts Страницы: 5

Бренд: Edge-Core Страницы: 60

Бренд: steute Страницы: 10

Moeller IZM Series

Бренд: Eaton Страницы: 4

Smart MatriX LE

Бренд: Analog way Страницы: 56

Ascentic MH10-ARC

Бренд: Audio Authority Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды