Micromeritics ASAP 2460, Руководство оператора

Страница: 40 / 468

Defining Sample Information Files ASAP 2460 Operator’s Manual
2-10 246-42800-01 - Aug 2013
7. In the
Mass
group box, indicate if mass is to be manually entered by the operator (
Enter
) or
calculated by the system (
Calculate
). Refer to
Mass group box
, page
3-12
.
8. In the
Type of Data
group box, indicate if the data is to be automatically collected by the system
or manually entered by the operator. Select A
utomatically collected
for all sample runs where
the data are collected. Select
Manually entered
when another sample has been run on a different
instrument or different model instrument so that data can be analyzed or used for comparison. If
you select
Manually entered
, the data are entered in the Isotherm interactive report. Refer to
Importing Manually Entered Isotherm Data from the Interactive Isotherm Window
, page
2-
25
.
9. If SPC (Statistical Process Control) information is to be reported, enter appropriate information in
the
User Parameters
group box. These are user-definable parameters that can be entered and
tracked along with other statistical process control data.
10. Enter any pertinent information about the sample information file in the
Comments
text box.
Comments are displayed in the report header.
11. Click the
Add Log Entry
button to enter notes for the instrument log report. Create entries that
cannot be recorded automatically through the application software. For example, you may record
that the port filter was changed.
12. To auto-populate fields from another .SMP file, click the
Replace All
button and select a .SMP
file that contains the desired parameters. Select the file and click
Replace
.
13. After completing the
Sample Description
window, click the parameter tabs to edit other sample
information file parameters.
14. Click
Save
, then click
Close
to save the file with the default file name. To save as a different file
name, go to
File > Save As
and enter a new file name. The file can later be retrieved from the
Sample Information folder in the instrument library.
Sample
Information
folder
Library