Micromeritics ASAP 2460 Скачать руководство пользователя страница 296

Страница: 296 / 468

Appendix B

ASAP 2460 Operator’s Manual

B-16

246-42800-01 - Dec 2013

2563-

Cannot write. File or directory (file/directory name) read only.

Cause:

The referenced file or directory is read-only. You cannot write to this
file.

Action:

Have the administrator of the computer set up proper read/write access
to the directories and files.

2572-

File (filename) is already selected for the analysis.

Cause:

The file selected for HOA reporting cannot produce a valid report.

Action:

Choose a different sample file.

2585- The following libraries are missing: <library-name>, <library-name>, ....

2586-

Sample file [name] has no pressure table entries.

2587-

Sample file [name] has no dose incremental table entries.

2599- The selected file has an extension that is not supported by this operation.

Cause:

This message is triggered on application start up if any of the library
files used by an application, does not exist on disk.

Action:

Add the library into the Libraries folder.

Cause:

An attempt was made to start an analysis with an empty target
pressure table.

Action:

Add target pressures to the pressure table in the analysis conditions.

Cause:

An attempt was made to start an analysis with an empty dose
increment table.

Action:

Add dose increment entries to the dose increment table in the analysis
conditions.

Cause:

The selected file does not havea a supprted file extension.

Action:

Open the adsorptive properties file. Open the FPI file selector and
select another file with a supported file extension.

Содержание ASAP 2460





















































































































































































































































































































































































































































































Результаты поиска

Содержание ASAP 2460

Отзывы:

Похожие инструкции для ASAP 2460

Бренды по названию

Популярные бренды

Micromeritics ASAP 2460, Руководство оператора

Результаты поиска

Содержание ASAP 2460

Отзывы:

Похожие инструкции для ASAP 2460

Бренды по названию

Популярные бренды