Page 43
Operation
optoNCDT 1900 / Profinet
1
The LED visualizes the status of the transmission of measured values:
- green: transmission of measured values is running.
- yellow: waiting for data in trigger mode
- gray: transmission of measured values stopped
Data queries are controlled by using the buttons
Play/Pause/Stop/Save
the measured values that were transmitted
Stop
pauses the chart; you can still use the data selection and zoom functions.
Save
opens a Windows selection dialog for the
file name and storage location to save the video signal in a CSV file.
Click on the button (Start) to display the video signal.
2
In the left-hand window, the video channels to be displayed can be switched on or off during or after the measurement. Inactive
curves are grayed out and can be added by clicking on the check mark. If you want to have displayed one single signal, click on
its name.
- Peak marking (vertical blue line), corresponds to the evaluated measured value
- Linearized measuring range (limited by gray hatching), not changeable
- Masked range (limited by light blue hatching), changeable
3
To scale the intensity axis in the graph for the measured values (y-axis), you can use
Auto
(= automatic scaling) or
Manual
(=
manual scaling).
4
The search function permits time-saving access to functions and parameters.
5
The text boxes display the current values for distance, exposure time, current measuring rate, display rate and time stamp.
6
Mouseover function. When the chart has been stopped and you move the mouse over the graph, points on the curve are
marked with a circle and the associated intensity is displayed. The corresponding x position is displayed in % above the graph
window.
7
The linearized range is in the graph between the gray shadows and can not be changed. Only peaks of which the centers are in
this range can be evaluated. The masked range may be limited if needed. Then an additional pale blue shadow limits the range
on the right and on the left side. The peaks remaining in the resulting range are used for evaluation, see Chap.
