Michell Instruments Liquidew EExd Скачать руководство пользователя страница 16

Страница: 16 / 90

Liquidew EExd User’s Manual

97097 Issue 14.1, November 2019

INSTALLATION

2.2

Hazardous Area Safety

Refer to Appendix H for the Hazardous Area Certification of this product.

This product is fitted with a marking label that contains Hazardous Area information

pertinent to the suitable location and installation.

During all installation and operation activities, local regulations and permitted working

routines must be observed. Installation should only be performed by competent personnel

and in accordance with the latest version of IEC/EN60079-14 or local equivalent.

Repair and servicing of this equipment must only be carried out by the manufacturer.

An Installation and Maintenance Information Sheet is supplied separately to the manual.

WARNING:

This product is certified safe for use in a Zone 1 and Zone 2

area only. This product must not be installed or used within

a Zone 0 area.

WARNING:

This product must not be operated within an explosive

atmosphere greater than 1.1 bara.

WARNING:

This product must not be operated with enriched oxygen gas

samples (more than 21% oxygen content).

WARNING:

This product must not be operated outside of the

temperature range of -40 to +60°C (-40 to +140°F).

WARNING:

The enclosure of this product provides Exd protection, partly

through the threads used for mounting the lid, stopping

plugs and cable gland. At all times effort should be made to

ensure these threads are suitably protected from damage

and that only appropriately rated mating parts are applied

to them, in accordance with the certifying requirements.

Содержание Liquidew EExd



























































































Результаты поиска

Содержание Liquidew EExd

Отзывы:

Бренды по названию

Популярные бренды

Michell Instruments Liquidew EExd, Руководство пользователя

Результаты поиска

Содержание Liquidew EExd

Отзывы:

Бренды по названию

Популярные бренды