MHP JNR4, Руководство пользователя

Страница: 25 / 40

Gas & LP Tank Connections
GAS & LP CYLINDER
Check Local Codes
Consult your local LP dealer or Natural Gas Company for rec-
ommended installation procedures and regulations. In the ab-
sence of local codes, installation must conform to the National
Fuel Gas Code, ANSI Z223.1 or CAN/CGA-B149.1 Natural Gas
Installation Code or CAN/CGA-B149.2, Propane Installation
Code.
Natural Gas Models
The grill is designed to operate on Natural Gas at a pressure of
7” water column (W.C.) [1.75 kPa]. Check with your gas utility
for local gas pressure. Use of your gas grill at pressures other
than approximate 7” WC could affect the performance of your
grill.
Natural Gas Hose & Inspection
A single hose of not more than 12 feet long (3.6 meters) is sup-
plied with the cart-styled models.

Check the hose before each use at places where there could
be extra bending, such as near the gas supply quick-
disconnect coupling and at the grill valve connection. Look for
cracking, cuts or heat damage. Check the entire length for
cracking and excessive wear.

To replace the hose, turn off gas supply at valve. Release the
quick-disconnect coupling. Using a wrench, disconnect hose
from grill valve connection under the control panel, and clean
threads.

Replace only with an identical hose from the manufacturer or
an authorized dealer. Do not use pipe joint compound on
the flared fitting at the control panel grill valve connec-
tion.
LP Gas Models
The Grill using a Type I LP cylinder includes the Gaslow Regu-
lator that incorporates an industry exclusive Leak Detector and
Fuel Supply Indicator. Any replacement pressure regulator or
hose assembly must meet or exceed the specifications of the
Gaslow Regulator.
DO NOT CONNECT THE GRILL TO AN LP GAS
CYLINDER GREATER THAN 20 LB. CAPACITY.
LP Gas Cylinder Requirements: (The LP-Gas Cylinder is not
supplied with your MHP Grill.)

The LP cylinder should be equipped with an OPD (Overflow
Prevention Device) and a QCC! Or Type 1 (CGA810) cylin-
der connection. This cylinder connection is compatible with
the grill connection. OPD is an internal mechanical device
that limits the amount of liquid propane and prevents overfill-
ing the LP cylinder. The correct filling methods for the filling
of your cylinder are by weight or volume, as described in
NFPA 58. Please make sure your LP dealer fills your LP
cylinder by weight or volume. Ask your LP dealer to read
purging and filling instructions on the LP cylinder before at-
tempting to fill.

All LP cylinders supply systems must include a collar to pro-
tect the cylinder valve.

The LP cylinder must be a 20-LB size (18 1/4 “ high, 12 ¼” in
diameter).

The LP cylinder must be constructed and marked in accord-
ance with the specifications for LP-gas cylinders of the U.S.
Department of Transportation (D.O.T.). In Canada, gas
cylinders must meet Canadian LP Gas Tank Specification
Code, National Standard of Canada, CAN/CSA-B339,
Spheres and Tubes for the Transportation of Dangerous
Goods and Commission.

Be sure your LP cylinder has a D.O.T. certification and has
been tested within five years. This information is usually
marked on the protective collar.
WARNING: If you use an LP tank exchange service,
be sure that the exchanged tank is equipped with an
OPD. If there is not an LP tank available for ex-
change equipped with an OPD, we recommend that
you have your LP tank filled by an authorized LP
dealer.
DANGER
Do not use an open flame to check for gas leaks. Be
sure there are no sparks or open flames in the imme-
diate area while you check for leaks. Sparks or flames
will result in a fire or explosion which can cause seri-
ous bodily injury or death, and damage to property.
25