MHP JNR4, Руководство пользователя

Страница: 17 / 40

Natural gas hose for portable base mount :
The natural gas cart uses a
12 foot hose with a quick
disconnect (supplied). The
hose passes beneath the
heat shield through the front
access opening and con-
nects directly to the control
valve. The quick disconnect
end attaches to the gas sup-
ply line at the shut-off valve.
(Fig. 28)
JNR & WNK Assembly Instructions
Step 2: Continued
D. Column Mount Gas Connections
Aluminum and Stainless Column mounts:
The supply line connection pass beneath the heat shield and
through the front slot with the
protected edge and attaches
to the valve.
Don’t forget to attach the
front Access Panel to the
Column.
(Fig. 25)
LP Propane for portable base and deck/patio mounts :
The hose connection from the
Gaslow/Regulator passes out
the front access opening;
resting on the protected slot
edge beneath the control
panel. The LP tank locking
bar will press against the tank
as it is lowered into place to
prevent tank movement.
(Fig. 26)
Natural gas for deck/patio mount :
The gas line enters at the rear of the base curving up through
the base opening. The stainless steel flexible tubing line must
be connected to the incoming
gas line using a
3/8
" flare cou-
pling (not supplied by MHP).
The flexible tubing then passes
beneath the heat shield and
through the front access open-
ing and attaches to the control
valve.
(Fig. 27 )
See page 26 for tubing bend-
ing instructions.
Step 3: Attaching the Side Shelf
(Fig. 29)
1.Turn NuStone Shelf upside down to see the location of the four (4)
threaded inserts.
2. Position the aluminum shelf brackets on the shelf bottom and at-
tach them with the four (4) supplied 1/4-20 x 1/2” Phillips Head bolts
and lock washers.
DO NOT OVERTIGHTEN.
3. Attach the assembled shelf unit to the grill with the two (2) supplied
1/4-20 x 3/4” slotted head bolts and Kep nuts.
NOTE: Push both bolts
up through the bracket into the grill and
attach with the Kep nuts inside the grill. Tighten securely.
( Note: Repeat these steps to attach the Model WNK second
shelf.
Tighten all gas connections securely and leak test both
ends. See Leak Testing on page 23.
Please See Page 20 For Attaching the Stainless Steel
Fold Down Shelves.
17
1. Attach Shelf to
Shelf
Bracket
Fig. 29
2. Attach to Right
or Left Side of
Grill Head
Shelf bracket Kep nuts
inside the grill