TX3 transmitter
(installation)
Other functions
English
7
– English
9.9 - Locking or unlocking the RME memory
This procedure enables the user to lock and unlock the RME memory to prevent accidental memorisation of other transmitters not envisaged on the system.
01.
Press and hold the key
■
(for approx. 5 seconds)
, until the motor performs
1 VIBRATION
; then release the key.
02.
Press and hold the keys
▲
and
▼
(for approx. 5 seconds)
, until the motor performs
4 SHORT mo tions
; then release the key.
03.
Then:
• to LOCK the memory, press key
▲
once;
• to UNLOCK the memory, press key
▼
once;
The motor then completes
3 LONG motions
(= memory locked/unlocked).
Caution
!
– If the memory is Blocked, and the user attempts to memorise a Transmitter, the motor performs 1 SHORT motion (= memory blocked) in
place of the usual 3 LONG motions envisaged in the transmitter memorisation procedure.
9.10 - Total deletion of the memory and restoring factory settings
Caution
! –
This procedure deletes all data in the RME memory, including positions “0”, “1”, functions and codes of memorised transmitters.
The procedure can be performed with a memorised transmitter or one that is not.
• With a transmitter already memorised:
01.
Press and hold the key
■
(for approx. 5 seconds), until the motor performs
1 VIBRATION
; then re lease the key.
02.
Press and hold the key
▲
until the motor performs
3 LONG motions
; then release the key precisely on the third motion.
03.
Press and hold the key
■
until the motor performs
3 LONG motions
; then release the key precisely on the third motion.
04.
Press and hold the key
▼
until the motor performs
3 LONG motions
; then release the key precisely on the third motion.
05.
(within the next 2 seconds)
Press keys
▼
and
▲
simultaneously and then release.
After a few seconds the motor completes
5 LONG motions
(= Memory deleted).
• With a transmitter not yet memorised:
01.
Disconnect the motor from the power supply (if connected) and then reconnect. Within the next 60 seconds, press and hold the key
■
, until the motor per-
forms
1 VIBRATION
; then release the key.
02.
(within the next 5 seconds) Disconnect and reconnect the motor from the power supply again. Within the next 60 seconds, perform the remaining points of
this procedure.
03.
Press and hold the key
■
until the motor performs
1 VIBRATION
; then release the key.
04.
Press and hold the key
▲
until the motor performs
3 LONG motions
; then release the key precisely on the third step.
05.
Press and hold the key
■
until the motor performs
3 LONG motions
; then release the key precisely on the third step.
06.
Press and hold the key
▼
until the motor performs
3 LONG motions
; then release the key precisely on the third step.
07.
(within the next 2 seconds)
Press keys
▼
and
▲
simultaneously and then release.
After a few seconds the motor completes
5 LONG motions
(=
Memory deleted).
(
1
-
2
-
3
)
1
5
(
1
-
2
-
3
)
(
1
-
2
-
3
)
ON
OFF
ON
OFF
=
=
4
1
(
1
-
2
-
3
)
1
5
(
1
-
2
-
3
)
(
1
-
2
-
3
)
The TX3 transmitter has a support in order that it can be mounted, to a wall
for example. Adhesive tape can be used if the surface is smooth and solid,
otherwise the special screw and screw anchor supplied.
Содержание RME
Страница 66: ...IX 7 6 8 A 8 C F B D C A E Push 5 8 B 8 D...
Страница 67: ...X 10 mm M 8 E 8 G 8 H 9 8 F 8 I...
