MH THYROMAT-BDC, Руководство пользователя

Страница: 56 / 108

U
U
s
s
e
e
r
r
M
M
a
a
n
n
u
u
a
a
l
l
Revision 8.6 SECTION 3: TORQUE PARAMETERS
50
3.5. TORQUE APPLICATION PARAMETERS LIST
Table 3-3 lists the typical parameter settings for software version CTT01.xx Torque applications.
Table 3-3: Torque Parameter List
NO PARAMETER DESCRIPTION SCALE INCREMENT DEFAULT
1
CT Ratio CT ratio 50:1 to 3000:1 - 200:1
2 CT Enable Enable CTs Yes or No - Yes
3 Motor Current Motor full load current < 60% of CT
ratio
- 70A
4
Overload class Overload class type 5 to 10 - 5
5
Notch 1 Voltage Voltage applied until N1 delay complete 30% to 100% 1 50%
6
Notch 2 Voltage Voltage applied after N2 delay complete 30% to 100% 1 60%
7 Notch 3 Voltage Voltage applied after N3 delay complete 30% to 100% 1 70%
8 Notch 4 Voltage Voltage applied after N4 delay complete 30% to 100% 1 100%
9 Notch 1 Plug Plugging Voltage applied when N1 is
selected in the opposite direction 30% to 100% 1 50%
10
Notch 2 Plug Plugging Voltage applied when N2 is
selected in the opposite direction 30% to 100% 1 60%
11
Notch 3 Plug Plugging Voltage applied when N3 is
selected in the opposite direction 30% to 100% 1 70%
12 Notch 4 Plug Plugging Voltage applied when N4 is
selected in the opposite direction 30% to 100% 1 80%
13 Notch 2 Delay Delay before N2 Voltage can be applied
to the motor 50ms to 9950ms 50ms 2000ms
14 Notch 3 Delay Delay before N3 Voltage can be applied
to the motor 50ms to 9950ms 50ms 2000ms
15 Notch 4 Delay Delay before N4 Voltage can be applied
to the motor 50ms to 9950ms 50ms 2000ms
16 Voltage Ramp Ramp time to voltage of selected notch 200ms
17 Brakes ON Speed Brake application speed 2% to 10% 1 5%
18 Max Stall V Maximum Stall Voltage 20% to 80% 5% 70%
19 Minimum Start V Minimum Start Voltage 10% - 80% 5% 30%
20 Ph Shift Off Tim Phase shifter off time delay 60 to 240 ms 20 ms 100 ms