MG ChargeHub 11, Инструкция по эксплуатации

Страница: 8 / 51

INSTRUCTION MANUAL
MG MOTOR
8
2.3 TECHNICAL CHARACTERISTICS
1) Charging method:
• Use the mobile APP (from OCPP platform) to scan the charging QR code for charging.
• Swipe the RFID card to start charging.
• Set it as Plug & Play, which is the default mode.
2) Build-in electrical protection.
3) Suitable for all vehicles complying with IEC 62196-2.
4) Output power configuration: support output power configurable (Maximum output current set by
DIP switch, single-phase 6A-32A, three-phase 6A-16A).
2.2 PRODUCT FUNCTIONS
1. Charging function: During the charging process, the charger can identify the connection state between
the charger and the vehicle end, and according to this state, the vehicle can be guided to perform safe
charging. The vehicle can control the start and stop of charging.
2. The charger controller has the functions of measurement, control and protection for the charger.
3) With lightning protection, overload protection, short circuit protection, leakage protection, over
voltage protection, under voltage protection and grounding detection.
3. Charger supports OCPP 1.6J communication protocol, and the charger can be linked to the data
service platform and management platform (Cloud platform) of OCPP 1.6J.
4. The charger can keep normal working status when used in outdoor environment (Protection level is
IP55, IK10).