MG ChargeHub 11, Инструкция по эксплуатации

Страница: 41 / 51

41
MG MOTOR
INSTRUCTION MANUAL
b) After entering the web page and setting your networking priorities, check the 4G signal and
connection status according to “Status Check”.
c) If the 4G signal is too weak, check if the SIM Card is inserted correctly and activated correctly. Then
restart the device and repeat the preceding procedure.
a) When not using Telstra network, APN (Access Point Name) must be set. The APN can be obtained
from the local network provider. The following guide shows how to set APN.
i. Click “Software Setting”.
ii. Choose “Enable modification” in “4G configuration”.
iii. Fill in correct APN data.
iv. Click “Submit”.
Note: APN for Telstra SIM Card is “telstra.wap”. For other SIM card suppliers, please check with your
provider.
(If you want to insert the SIM card after the installation, please
contact an electrician for help. For your safety, please DO NOT
attempt to do this unless you are a qualified electrician).
B.3.2 Via WiFi STA
MG ChargeHub has 2 WiFi modes, AP and STA:
1. AP(Access Point) is the default mode. In AP mode, ChargeHub is a source of WiFi, broadcasting a WiFi
named “MG_ChargeHub”. Other devices can access the Web Configuration page via the ChargeHub
WiFi. Note: AP mode has no access to the Internet.
2. STA(Wireless Client Station) mode, the charger is connected to the Internet via hotspots such as your
local WiFi network, which can access the Internet and exchange data with the OCPP platform.
Sim Card Slot
Ethernet Cable
Socket
Rubber plug can
be cut to fit cables
Power Connection
comparison table