MG ChargeHub 11, Инструкция по эксплуатации

Страница: 47 / 51

47
MG MOTOR
INSTRUCTION MANUAL
D. Appendix
The following documents are the product design standards:
• IEC 61851-1:2017Electric vehicle conductive charging system –Part 1: General requirements
• IEC 61851-21-2:2018 Electric vehicle conductive charging system –Part 21-2: Electric vehicle
requirements for conductive connection to an AC/DC supply – EMC requirements for off-board
electric vehicle charging systems
• IEC 60068-2 Environmental testing
• IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
• IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
• IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h
• ﹢ 12 h cycle)
• IEC 60068-2-78:2012 Environmental testing – Part 2-78: Tests – Test Cab: Damp heat, IEC 61000-4
Electromagnetic compatibility (EMC)
• IEC 61000-4-2:2008, Electromagnetic compatibility (EMC) – Part 4-2: Testing and measurement
techniques – Electrostatic discharge immunity test
• IEC 61000-4-3:2006, Electromagnetic compatibility (EMC) – Part 4-3: Testing and measurement
techniques – Radiated, radio-frequency, electromagnetic field immunity test
• IEC 61000-4-4:2012, Electromagnetic compatibility (EMC) – Part 4-4: Testing and measurement
techniques – Electrical fast transient/burst immunity test
• IEC 61000-4-5:2014, Electromagnetic compatibility (EMC) – Part 4-5: Testing and measurement
techniques – Surge immunity test
• IEC 61000-4-6:2013, Electromagnetic compatibility (EMC) – Part 4-6: Testing and measurement
techniques – Immunity to conducted disturbances, induced by radio-frequency fields
• IEC 61000-4-11:2004, Electromagnetic compatibility (EMC) – Part 4-11: Testing and measurement
techniques – Voltage dips, short interruptions and voltage variations immunity tests steady state
• IEC 60950-1:2005 Information technology equipment - Safety - Part 1: General requirements
• BS EN 62196-1:2014 Plugs, socket-outlets,vehicle connectors and vehicle inlets — Conductive charging
of electric vehicles - Part 1: General requirements
• IEC 62196-3:2014 Plugs, socket-outlets, vehicle connectors and vehicle inlets – Conductive charging of
electric vehicles –Part 3: Dimensional compatibility and interchangeability requirements for d.c. and
a.c./d.c. pin and contact-tube vehicle couplers