MG ChargeHub 11, Инструкция по эксплуатации

Страница: 6 / 51

INSTRUCTION MANUAL
MG MOTOR
6
1.2 SPECIFIED USE
• This product is AC charger that can charge electric powered vehicles (for example, an electric car) in
indoor and outdoor areas.
• When installing and connecting the charger, follow local regulations.
• The intended use of the equipment includes, in all cases, the environmental conditions established for
the equipment.
• The storage of charger should be met the following requirements:
• Before the equipment installation, the charger with components should be stored in the indoor
dry and ventilated place. The warehouses’ temperature is between -40
o
C and ﹢85
o
C, the
monthly average relative humidity is not exceeded 90%, and there is no corrosive or explosive
gas. During the storage, please avoid rain, exposure, condensation and frost.
• After the equipment installed, the charger shell should be kept sealed to avoid raining and
soaking.
• The equipment is developed, produced, inspected and filed according to relevant safety standards.
Therefore, if the instructions and safety technical instructions for the intended use are observed,
the product will not cause damage to property or endanger the health of the person under normal
circumstances.
• The instructions contained in this manual must be strictly observed, otherwise there may be a safety
hazard or the device may fail. Although this manual describes the relevant safety instructions, it is
important to pay attention to the safety regulations and accident prevention regulations when the
charging equipment is used.
• Due to technical and legal restrictions, it is not possible to supply all models to all countries and
regions.
1.3 ABOUT THIS MANUAL
• This manual applies to MG ChargeHub
• This manual is for the following people:
• End customer (AC charger user).
• Debugging and service technicians.