MG ChargeHub 11, Инструкция по эксплуатации

Страница: 26 / 51

INSTRUCTION MANUAL
MG MOTOR
26
Figure A A-11 Into the line installation
Figure A-12 Charger installation
2. After connecting the inlet line with the charger body, fix the charger body on the vertical column.
First, use 2 cross M6*12 (torque: 1.8-2.0n.m) combination screws to fix the wall mount on the column.
3. Hang the charger on the column, screw in two pattern M6*12 (torque: 1.8~2.0 N.M) combination
screws at the bottom, as shown in Figure A-12.
4. Insert the hanger hook and guard cover into the mounting position and push them up, and then lock
them from the front with two M4*12 pattern composite screws (Torque: 1.4~1.6 N.M) with column
core head, as shown in Figure A-13.