C
ompressed-air Stapling Plier
Z 23 P
Page:
9
Mod.:
01/2022
ET
Seite 9 von 34 31.01.22 P:\Technik\ZANGEN\Z 23 P\Bedienungsanleitung\Englisch\Manual Z 23 P Pneum en_01_2022.docx
DIN standards, VDE regulations) is competent can assess the safe condition of machines,
especially stapling machines.
7
Initial commissioning
Before the stapling device is put into operation, please read all instructions in this manual. This
stapling machine may only be put into operation by trained personnel.
To make the stapling device ready for operation after delivery, the following tasks must be
carried out:
-
Check the equipment for completeness
-
Load the tool with staples
-
Connect the compressed air
The air pressure is 5 - 8 bar overpressure.
It is necessary to connect a filter regulator consisting of a filter, water separator and pressure
reducer upstream.
A hose with a clear width of 8 mm is required as the connection hose.
When the stapling machine is ready for operation, it is prohibited to touch the
stapling ejection opening or the running stapler!
DANGER OF INJURY!
Oxygen or combustible gases may not be used as a propulsion source for
pressure driven machines.
8
Basics of working technique and handling
Before the operator uses the stapler, he must find out about the respective application and
check whether the stapler is suitable for it. Follow all safety instructions exactly!
Make sure that the stapler is not damaged and that it can be operated safely!
The operationally safe condition of the stapler must be checked continuously before starting
work!
Safety devices must not be bypassed or made ineffective!
Keep your work area tidy.
Clutter in the work area can lead to accidents.
Use only ORIGINAL staples that are specially manufactured for this quality device. Foreign
staples can lead to malfunctions and considerable damage.
