C
ompressed-air Stapling Plier
Z 23 P
Page:
14
Mod.:
01/2022
ET
Seite 14 von 34 31.01.22 P:\Technik\ZANGEN\Z 23 P\Bedienungsanleitung\Englisch\Manual Z 23 P Pneum en_01_2022.docx
11.6
Information on the rating plate
The rating plate is
applied to the magazine. It contains the following information:
Company name and full address of the manufacturer
Type designation of the stapling device
Type designation of compatible mounting devices
Maximum permissible operating pressure
CE mark (The product complies with the standards listed in the enclosed Declaration of
Conformity.)
GS mark (The product has passed a safety inspection according to the Equipment and Product
Safety Act.)
Triangle pointing downward (This triangle indicates that you are only permitted to use the
device if the trigger safety is functional.)
Year built
12
Preparing the stapling device
12.1
Unpack the stapling device
Remove the stapling device from the packaging.
Remove all packaging material, such as film, filler material, and the packaging carton.
WARNING
Suffocation hazard playing with packaging film.
Do not play with packaging film.
Keep the packaging material for later use.
Keep the transport case for transporting the stapling device.
Transporting the stapling device is only allowed in the transport case.
