C
ompressed-air Stapling Plier
Z 23 P
Page:
8
Mod.:
01/2022
ET
Seite 8 von 34 31.01.22 P:\Technik\ZANGEN\Z 23 P\Bedienungsanleitung\Englisch\Manual Z 23 P Pneum en_01_2022.docx
3.2
Use other than as intended
Uses particularly contrary to the intended use include:
Use by persons unfamiliar with the use of stapling devices and the materials in use.
Use with safety devices bypassed.
Use of stapling devices that have been modified without permission.
Use of any accessories not indicated in these instructions for use.
Use of compressed air sources not listed in these instructions for use.
MEZGER Heftsysteme GmbH GmbH does not accept any liability for damage caused by use other
than as intended.
4
Warranty and liability
Our “General Terms of Sale and Delivery” shall generally apply
.
These terms were made available to the operator by the time of contract award at the latest.
Any warranty and liability claim in the case of personal and material damage shall be
excluded, if such damage occurred as a result of:
-
Improper use of the tool (not in compliance with intended use).
-
Non-compliance with the specification provided in the operating instructions as regards
transport, storage, assembly, commissioning, operation, maintenance and setup of the
equipment.
-
Operation of the tool with defective safety equipment or improperly installed or non-
functional safety and protection facilities.
-
Improper monitoring of tool parts which are subject to wear and improperly executed
repair work.
-
Any type of manipulation of the tool.
5
Ambient conditions/Emission
The device should be operated at room temperature, protected against environmental
influences.
Use within an explosive atmosphere is permitted only with prior consent and written permission
of the manufacturer.
The noise emission is less than 70 dB(A).
Non-atmospheric gases are not released during the stapling process.
6
Operating Personnel
Only trained, competent personnel are permitted to operate the stapler.
Note
: Anyone who has sufficient knowledge in the field of staplers due to their training and
experience and is familiar enough with the relevant state occupational safety regulations,
accident prevention regulations, guidelines and generally recognized rules of technology (e.g.
