27
Model:
Netti Dynamic AdaptPro
Language:
English
Version:
2021-11
My-Netti.com
5.4.5 SEAT DEPTH - ADJUSTING AT THE
REAR
Adjusting seat depth at the rear by moving
the back hinge point:
The back rest hinge has 2 possible positions
with 25 mm distance between them,
allowing for moving the back and thereby
changing the seat depth - that is changing the
distance from seat plate front to the chair back .
• Loosen the hinge screws on both sides and
fix the back in the desired position..
2 pcs 6 mm Allen key
Adjust the back cylinder position after the back
hinge is moved.
5.4.6 SEAT DEPTH - ADJUSTING THE
SEAT PLATE LENGTH
AT THE SEAT PLATE MIDDLE
Tilt the seat plate extra high to get access to the
screw from the side, as shown on the illustration.
Loosen the seat plate limiter strap underneath the
seat plate for extra tilt.
The seat plate depth is adjusted by removing the
long fixing bolt going through the seat plate, and
pulling or pushing the rear part of the seat plate to
desired depth.
2 pcs 5 mm Allen key
Seat plate depth scale
On the seat plate a scale is showing which seat
depth has been chosen.
