background image

67  

Model: 

Netti Dynamic AdaptPro

Language: 

English

 

Version:

 

2021-11

My-Netti.com

8.4 DRIVING TECHNIQUES - SLOPE  -

Important advise for driving down and up hill 

avoiding the risk of tipping.

   Avoid turning the wheelchair in the middle 

of a slope.

   Always drive as straight as possible.

   It is better to ask for assistance than taking 

risks. 

Driving uphill:

Move the upper part of the body forwards in order 

to maintain the balance of the chair.

Driving downhill:

Move the upper part of the body backwards to 

maintain balance of the chair. 

Control the speed of the chair by clutching the 

push rims. Do not use the brakes. 

8.5 DRIVING TECHNIQUES - UP AND 

DOWN STAIRS

 

    Due to the weight load - with wheelchair and 

user, we do not recommend driving a Netti 

AdaptPro wheelchair up or down stairs.  

The strain on assistants will be more than the 

manual handling regulation and  the 

ergonomic assessment max load.  

The risk for loosing control during stair 

passing can lead to danger for both 

wheelchair user and assistants.

   Use ramps and elevators when moving the 

user to higher or lower floor.

 

   Never use escalators, even if assisted by a 

companion.

   Do not lift the wheelchair holding onto the  

push-bow, leg-, arm- or head supports.

Содержание Netti AdaptPro













































































Отзывы: