49
Model:
Netti Dynamic AdaptPro
Language:
English
Version:
2021-11
My-Netti.com
5.10.9 GRANDIS LEG SUPPORTS
The Grandis leg supports require Grandis leg
support extension brackets.
The leg support Grandis is angle adjustable
- from
vertical to horizontal position.
• It is swing-able and removable.
•
It is height adjustable and comes with height- and
depth adjustable calf support.
•
The foot plates are hinged, and can be angled in
fixed positions.
As a standard the foot plates come with a lock con-
necting the 2 plates which makes the plates stronger
and reduces maintenance. If locking is not wanted, the
bolt of the lock can be removed by using an Allen key.
MOUNTING OF THE GRANDIS LEG SUPPORT:
• Fold the foot plates up.
•
Hold the leg support on the top joint, and place the
vertical bolt in the leg support fixing bracket on the
wheelchair, slightly turned outward.
•
Swing the leg support inwards and push slightly
downwards until it clicks into locked position.
GRANDIS ANGLE ADJUSTMENT
To adjust the angle of the leg support simply release
the red lever and lift or lower. The leg support will stay
in the position where you lock the lever.
GRANDIS FOOT PLATE HEIGHT ADJUSTMENT:
The foot plates are stepless height adjustable
•
Loosen the adjustment screw for the adjustment
bar to move freely.
•
Slide the foot plate to required height, then tighten
the screw well.
GRANDIS FOOT PLATE ANGLE ADJUSTMENT:
•
Unfix the 2 screws as shown below using an 5 mm
Allen key.
•
Adjust the foot plate to the required angle and
tighten the screws.
