22
My-Netti.com
Model:
Netti Dynamic AdaptPro
Language:
English
Version:
2021-11
5.3.2 FRONT FORK
Front forks come as standard with quick release
axles. The front fork is easily removed by pressing the
quick release button on top of the bearing house.
5.3.3 FRONT CASTORS
To take of
•
Press the release button on top of the front fork
bearing house - by pressing on the silicon cap
covering the release button.
To mount
•
Lead the quick release axle into the bearing house
and into the fork.
•
Pull the fork slightly to ensure that the fork is fully
locked.
Sand and sea water (salt used for gritting in
the winter) can damage the bearings of the
front castors. Clean the wheelchair
thoroughly after exposure.
5.3.4 FRONT CASTOR BEARING HOUSE
DEPTH ADJUSTMENT
The front castor bearing house position can be
adjusted changing the distance between the front
castors and the main wheels.
The adjustment range is 75 mm.
•
Remove the covers over the front castor bearing
house extension tube...
•
Unscrew the 2 screws holding the extension
tube from below.
•
Position to the desired front castor bearing
house depth.
Make sure that both vertical screws are
engaged into the extension tube.
• Tighten the vertical main screws firmly
• Replace the covers.
If the depth has been increased you need
one pair of additional cover. If the depth
has bee reduced you have one cover pair
in spare.
• Repeat on the other side.
