Meyra Netti AdaptPro Скачать руководство пользователя страница 39

Страница: 39 / 76

[email protected]

Model:

Netti Dynamic AdaptPro

Language:

English

Version:

2021-11

My-Netti.com

Available belts and harnesses:

• Pelvic stabilizer - (included in Netti Dynamic System)

• Upper body harnesses

• Ankle huggers

• Shoe shells

Pelvic stabilizer,

mounted to the seat plate, helps the user to keep

his/her position on the seat even under full spastic

extension.

HOW TO ADJUST THE PELVIC STABILIZER

The pelvic stabilizer is mounted on the belt fixing

brackets on the seating plate as shown on the

illustration.

•

Slide the pelvic stabilizer to a position where it

crosses the upper thighs, Angle: 70- 90 degrees.

•

Adjust the pelvic stabilizer / belt mounting point for

the belt to be tightened.

•

Remember to shorten the stabilizer beneath the last

used hole to avoid any conflict with chair frame.

A pelvic stabilization belt must always be used

when using upper body harness.

The seat plate is prepared with mounting loops on its

rear end for fixing the 2 rear belts of the 4-point pelvic

stabilizer.

H-BELT RACK FOR UPPER BODY HARNESS

Upper body harness rail is mounted to the chair-back

profiles by separate brackets.

See separate Mounting Description for upper body

harnesses at: www.bodypoint.com

ANKLE HUGGERS AND SHOE SHELLS

helps to keep the feet on the foot board not letting

them slide of during an extension spasm.

The ankle huggers are mounted by threading them

through the slots in the foot board on the leg support

and fixing the belt on the underside of the foot

plate, threading shown in the illustration - follow the

numbers.

Содержание Netti AdaptPro













































































Результаты поиска

Содержание Netti AdaptPro

Отзывы:

Похожие инструкции для Netti AdaptPro

Бренды по названию

Популярные бренды

Meyra Netti AdaptPro, Руководство пользователя

Результаты поиска

Содержание Netti AdaptPro

Отзывы:

Похожие инструкции для Netti AdaptPro

Бренды по названию

Популярные бренды