45
Model:
Netti Dynamic AdaptPro
Language:
English
Version:
2021-11
My-Netti.com
For the foot-board to fall into the foot-board lock
after one sided extension piece adjustment, the foot-
board has to be repositioned.
The foot-board lock is removed from the length
profile where it normally sits -
and mounted to the foot-board
extension bracket.
The foot-board extension bracket is mounted to the
length profile where the lock was sitting.
Fix the foot-board extension bracket with 2 M6
screws with 5 mm Allen key through the length
profile into 2 nuts.
1 pc 5 mm Allen key
Fix the foot-board lock with one M8 screw with 6 mm
Allen key.
1 pc 6 mm Allen key
This picture shows the bracket reaching forward,
allowing for longer left leg where the right leg
support and calf pad has to go backwards: - suiting a
user with shorter right leg.
This picture shows the bracket reaching backwards,
allowing for longer right leg where the right leg
support and its calf pad go forwards: - suiting a user
with longer right leg.
All mounting illustrations are showed for Netti
Dynamic Parallel. The mounting procedure for Netti
Dynamic Dual is similar.
Extension platform kit for Dual leg support: 82940
and 82941.
